The access controller
it can access four line Han display card reader and four line Han display fingerprint access card reader to realize three authentication modes: swipe card authentication, card plus password and card plus fingerprint authentication, so as to adapt to the security level of different occasions.
It supports double electric lock access, generally electric plug-in lock and electromagnetic lock, and can realize single door two-way or double door one-way card swiping.
Support the selection of power on lock and power off lock, and support the key to open the door.
It has one fire alarm input, one burglary alarm input, two electric lock control channels, two electric lock relay output channels and one auxiliary relay output channel.
The electric lock can be directly driven, or the special power supply for access control can be controlled by relay. All relay outputs provide normally open and normally closed contacts.
It supports offline use, and the authorization list is stored in the built-in flash space without loss of power. Under offline state, access control operation records are generated normally and stored in the control. After online, the records are uploaded automatically without manual intervention.
12 function time periods can be set. Enable: authorization card swiping to open the door, other card swiping is invalid; disable: all card swiping is invalid (except privilege card); normally open: that is, the access is not locked mode, without swiping; swiping: except authorization card, other unauthorized users of the unit can swipe to open the door.
Support on-line monitoring of equipment status.
It supports online upgrade function and can download new code to the controller remotely.
parameter model
J101200
AC220V < / BR >
br > merit < / BR >
< 15W) j10xxx < / BR >
< 30W) j20xxx and j30xxx
keyboard
none
voice / sound
support
communication interface
RS485
Online upgrade
supports
dimension
960 × 740 × 140mm (j10xxx)
890 × 800 × 120mm (j20xxx)
1000 × 800 × 150 mm (j30xxxx)
Processor
high anti-interference ability of Freescale single chip
memory capacity
16mbit
recording capacity
70000
List capacity
70000
data saving time
10 years
card processing time
< 0.5 seconds
card reading frequency
13.56M
13.56M / 2.4G
13.56M / 2.4G
13.56M / 2.4G
card reading distance
1-5cm
(active card swiping required)
1-5cm
(active card swiping required)
1-5cm (13.56M card, active card swiping required)
5cm-5m (mobile 2.4G card, automatic card reading)
1-5cm
(Need to swipe the card actively)
support card type
01. 13.56M card
01. 13.56M card
02. China Telecom (Unicom) 2.4G mobile card
01. 13.56M card in line with iso14443-typea
02. China Telecom (Unicom) 2.4G mobile card
01. 13.56M card in line with iso14443-typea
02. China Mobile 2.4G mobile card
Комментарии
Отправить комментарий